OPEN-SMART Con retroilluminazione LED 3.3V 1.8 pollici 128 * 64 Modulo scheda breakout scudo LCD monocromatico SPI seriale per Arduino

Features

Note: If you want to place the bulk order that the stock is not enough, please contact with us.

This is a 1.8 inch LCD expansion board with serial SPI interface. This display has a controller built into it with RAM buffering, so that it is easy to control by MCU. 

It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy.

It leads out PAD pins so that you can plug it onto the breadboard or use cable to connect it for Arduino.

– Can use it to display characters, graphics and BMP format images.

– Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V board, you can connect to it OPEN-SMART Board with 5V/3.3V power switch. You need to add a level conversion circuit if you use for Arduino.

You can also connect it to other 3.3V MCU directly.

– Resolution: 128*64, monochrome

– Display size: 1.8 inch;

– Active area: 38.8x19mm

– PCB size: 47.6x37mm

– Drive IC: ST7567  

– Operating voltage: 3.3V;

– Logic level: 3.3V;

– Operating current: the maximum is 5mA

– IO Port Package: PAD is available, the pin pitch is 2.54mm.

– Backlight: LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day.

– Great for DIY.

Part List (Schematics and program can be sent , Please contact us)

1 x Module