Modulo di ricarica rapida da 22,5 W

11,99 €

Disponibilità: 975 disponibili

COD: 1005011702884262 Categoria:
Spedizione € 6,62Via Spedizione VitacomodaConsegna: dic 2 - 11
KlarnaPaga a rate con KlarnaSe Klarna approva l’ordine, lo scegli al checkout.

Impegno di servizio

Confronta le opzioni

Voghion

Catalogo affiliato

Cerco un riscontro sul catalogo Voghion…

IBS

Catalogo libri

Cerco il libro su IBS…

Vitacomoda

Vendita diretta

Questa scheda
Modulo di ricarica rapida da 22,5 W

Modulo di ricarica rapida da 22,5 W

11,99 €

Aggiungi al carrello





Caratteristiche:


1.Compatibilità multi-protocollo: supporta PD/QC/APPLE e altri protocolli principali, adattandosi alla ricarica rapida di tutti i marchi di dispositivi.


2.Protezione di sicurezza quadrupla: protezione intelligente da sovraccarico/scarica eccessiva/sovratensione/surriscaldamento, per evitare potenziali rischi per la sicurezza.


3.Display a colori TFT: visualizzazione in tempo reale di potenza/tensione/temperatura, stato immediatamente visibile.


4.Design della scheda senza protezione: funzione di protezione integrata sulla scheda principale, saldatura diretta della batteria per risparmiare spazio e semplificare l’assemblaggio


5.Potenza intelligente di autoapprendimento: calibra automaticamente il display della potenza dopo il primo utilizzo, riflettendo accuratamente la carica rimanente della batteria

Parametro:
Nome prodotto: modulo di ricarica rapida da 22,5 W
Parametri di ingresso: 5V3A/9V2A/12V1.5A
Parametri di uscita: 5V3A/9V2A/12V1.5A/10V2.25A
Interfacce: Configura 1 porta Type-C per la ricarica rapida (può essere utilizzata sia per la ricarica che per l’uscita) + 2 porte USB per l’uscita di ricarica rapida.
Protocollo: PD, QC, APPLE, FCP, SCP, VOOC
Funzione: con protezione da sovraccarico, scarica eccessiva, sovratensione, surriscaldamento e altri tipi di protezione, alto tasso di conversione, stabilità di corrente e tensione.
Nota: 22,5W è il protocollo di ricarica super veloce, la ricarica rapida bidirezionale è il protocollo PD20W, più interfacce contemporaneamente l’uscita della ricarica rapida di no
Compatibilità della batteria: Può ospitare due celle 1260110, richiede saldatura (batterie non incluse)
Dimensioni interne di installazione: ca.110x60x23 mm

Istruzioni di montaggio:
1.Poiché lo schermo della scheda madre è fragile, al momento della ricezione, accendere lo schermo per verificare se lo schermo è normale dopo la saldatura dello stagno, i fili dello schermo verranno estrusi dalle forze esterne e verranno spesi sullo schermo scoppiato, prestare attenzione a proteggere lo schermo durante l’uso.
2.Uso normale: i fili della batteria sono saldati insieme, la torsione dei fili, le clip a coccodrillo, le scatole a molla e altri metodi di accesso possono portare a un’alimentazione insufficiente che influisce sulla carica e sulla scarica. È necessario garantire un’adeguata protezione isolante per i poli positivo e negativo della batteria, al fine di evitare danni causati dal contatto con la scheda madre durante l’uso.
3.Scheda madre B+ collegata al polo positivo della batteria, B- collegata al polo negativo della batteria. Non collegare in modo inverso, poiché l’inversione danneggerebbe la scheda madre. Un collegamento errato potrebbe bruciare il circuito integrato (IC) della scheda, lasciando segni visibili. È sufficiente un collegamento inverso o un contatto per causare danni.
4.Accesso alla batteria per l’utilizzo di batterie al litio ternario da 3,7V; le batterie al litio ferro fosfato non sono compatibili. La batteria deve essere saldata in parallelo, non in serie. Una connessione in serie con una tensione troppo alta potrebbe danneggiare la scheda madre.
5.La scheda madre ha una funzione di protezione, le batterie di saldatura non necessitano di aggiungere una scheda di protezione, la scheda di protezione della batteria ha un limite sulla corrente, oltre il limite disconnetterà l’uscita.

Istruzioni di Montaggio del Kit Power Bank Portatile:
1.Lo schermo della scheda madre è fragile.Al ricevimento, accendere per verificare la funzionalità dello schermo prima di saldare.La pressione esterna sul cavo flessibile dello schermo può causare distorsioni o guasti allo schermo.Maneggiare con cura per proteggere lo schermo durante l’uso.
2.Per il normale funzionamento, i fili della batteria devono essere saldati direttamente.Il collegamento tramite fili intrecciati, pinze a coccodrillo o terminali a molla potrebbe causare un’alimentazione insufficiente, compromettendo la carica/scarica.Assicurarsi che i terminali della batteria siano adeguatamente isolati per evitare il contatto accidentale con la scheda madre durante l’uso, che potrebbe causare danni.
3.Collegare il terminale positivo della batteria al pin B+ della scheda madre e il terminale negativo a B-.Non invertire la polarità, poiché ciò brucierebbe la scheda madre.I circuiti integrati bruciati mostreranno tracce visibili, che si verificano solo a causa di un collegamento inverso o di un contatto accidentale.
4.Utilizzare solo batterie al litio da 3,7 V.Le batterie al litio ferro fosfato non sono compatibili.Collegare le batterie in parallelo, non in serie.La connessione in serie crea una tensione eccessiva che brucerà la scheda madre.
5.La scheda madre incorpora una protezione integrata.Le batterie saldate non richiedono alcuna scheda di protezione aggiuntiva.Le schede di protezione della batteria impongono limiti di corrente; il superamento di questi limiti causerà la disconnessione dell’uscita.
6.Dopo aver installato la scheda madre e le batterie, fissare le batterie con del nastro adesivo.Per i modelli di batteria con discrepanze di spessore rispetto all’involucro, valutare se sono necessari distanziatori per evitare una sensazione di affondamento quando si preme l’involucro dopo l’assemblaggio.Problemi come il rumore della batteria o il collasso dell’involucro a causa del mancato controllo delle differenze di spessore o del fissaggio delle batterie con nastro adesivo costituiscono un assemblaggio improprio.Non ci assumiamo alcuna responsabilità per danni all’involucro o guasti alla batteria derivanti dallo smontaggio in tali circostanze.
7.L’involucro a scatto non è progettato per essere smontato ripetutamente.Testa sempre accuratamente tutte le funzioni, inclusi l’output/input della scheda madre, la ricarica rapida, i pulsanti e il display, prima di chiudere l’involucro.Idealmente, eseguire diversi cicli di carica/scarica per confermare la funzionalità prima di sigillare.I problemi derivanti dall’assemblaggio e dalla chiusura dell’involucro senza test preliminari costituiscono un assemblaggio improprio.Non ci assumiamo alcuna responsabilità per danni all’involucro o guasti alla batteria derivanti dallo smontaggio richiesto a causa di tali problemi.

Istruzioni per l’uso:
1.All’attivazione della ricarica rapida per telefoni cellulari, i protocolli di ricarica rapida pubblici e privati vengono distinti in base al fatto che la scheda madre adotta un chip intelligente per la ricarica rapida, compatibile con i principali protocolli di ricarica rapida pubblici presenti sul mercato per soddisfare le esigenze di ricarica rapida di diversi marchi di telefoni cellulari. Prima di effettuare un ordine, si prega di confermare che i propri telefoni cellulari siano compatibili con i protocolli pubblici, per evitare di non riuscire ad attivare la ricarica rapida!
2.Sulla carica del problema di calore della scheda madre, il tesoro di ricarica nel lavoro, la corrente attraverso la scheda madre e il chip, la conversione dell’energia avrà perdite, questa parte della perdita sotto forma di calore emesso, ricarica rapida, la potenza è grande, il calore è più evidente, questo è un normale fenomeno fisico.
3.Appena collegato alla batteria, il display digitale della potenza potrebbe essere impreciso. Il misuratore di potenza supporta la funzione di autoapprendimento della capacità della batteria: dopo alcuni cicli di carica e scarica, il funzionamento diventerà normale.

Il pacchetto include:
Modulo x1 + custodia x1 + accessori x1


Features:
1. Multi-protocol compatibility: support PD/QC/APPLE and other mainstream protocols, adapting to all brands of equipment fast charging
2. Quadruple safety protection: overcharging/over-discharging/over-voltage/overheating intelligent protection, to avoid potential safety hazards
3. TFT color screen display strength: real-time display of power/voltage/temperature, status at a glance
4. Protection-free board design: integrated protection function on the main board, directly weld the battery to save space and simplify assembly
5. Intelligent self-learning power: automatically calibrate the power display after the first use, accurately reflecting the remaining battery power

Parameter:
Product Name: 22.5W fast charging module
Input Parameters: 5V3A/9V2A/12V1.5A
Output Parameters: 5V3A/9V2A/12V1.5A/10V2.25A
Interfaces: Configure 1 Type-C fast charging port (can be charged as well as output) + 2 USB fast charging output ports
Protocol: PD, QC, APPLE, FCP, SCP, VOOC
Function: with over-charging / over-discharging / over-voltage / overheating and other kinds of protection, high conversion rate, current and voltage stability
Note: 22.5W is the super fast charging protocol, bidirectional fast charging is the PD20W protocol, multiple interfaces at the same time the output of the fast charging of no
Battery compatibility: Accommodates two 1260110 cells, requires soldering (batteries not included)
Internal installation dimensions: Approx. 110x60x23mm

Assembly instructions:
1. Because the motherboard screen is fragile, upon receipt, please power on the screen to test whether the screen is normal after welding on the tin, the screen wires will be extruded by external forces will be spent on the screen burst screen, please pay attention to protect the screen when using.
2. Normal use, the battery wires are welded up, wire twisting / alligator clips / spring box and other access methods will lead to insufficient power supply to affect the charging and discharging, the battery positive and negative need to do a good job of insulation protection to avoid damage caused by the use of the process of touching with the motherboard.
3. motherboard B + position connected to the battery positive, B – position connected to the battery negative, do not connect the reverse, the reverse will burn the motherboard, burn board IC there will be traces, only the reverse or touch connection will occur.
4. Access to the battery to use 3.7V ternary lithium batteries, lithium iron phosphate batteries can not be used, the battery parallel welding, not in series, series voltage is too high will burn the motherboard.
5. The motherboard has a protection function, welding batteries do not need to add a protection board, the battery protection board has a limit on the current, beyond the limit will disconnect the output.

Mobile Power Bank Kit Assembly Instructions:
1. The mainboard screen is fragile. Upon receipt, power on to verify screen functionality before soldering. External pressure on the screen flex cable may cause screen distortion or failure. Handle with care to protect the screen during use.
2. For normal operation, the battery wires must be soldered directly. Connecting via twisted wires, alligator clips, or spring-loaded terminals may cause insufficient power supply, affecting charging/discharging. Ensure proper insulation of battery terminals to prevent accidental contact with the mainboard during use, which could cause damage.
3. Connect the battery positive terminal to the motherboard’s B+ pin and the negative terminal to B-. Do not reverse polarity, as this will burn the motherboard. Burned ICs will show visible traces, which only occur from reverse connection or accidental contact.
4. Use 3.7V lithium batteries only. Lithium iron phosphate batteries are not compatible. Connect batteries in parallel, not series. Series connection creates excessive voltage that will burn the motherboard.
5. The mainboard incorporates built-in protection. Soldered batteries require no additional protection board. Battery protection boards impose current limits; exceeding these limits will cause output disconnection.
6. After installing the mainboard and batteries, secure the batteries with adhesive tape. For battery models with thickness discrepancies relative to the casing, assess whether spacers are needed to prevent a sunken feel when pressing the casing after assembly. Issues like battery rattling or casing collapse due to failure to check thickness differences or secure batteries with tape constitute improper assembly. We assume no responsibility for casing damage or battery failure resulting from disassembly under such circumstances.
7. The snap-fit casing is not designed for repeated disassembly. Always thoroughly test all functions—including motherboard output/input, fast charging, buttons, and display—before closing the casing. Ideally, perform several charge/discharge cycles to confirm functionality before sealing. Issues arising from assembling and closing the casing without prior testing constitute improper assembly. We assume no responsibility for casing damage or battery failure resulting from disassembly required due to such issues.

Instructions for use:
1. On the activation of cell phone fast charging, cell phone fast charging public and private protocols to distinguish between the motherboard adopts intelligent fast charging chip, compatible with the mainstream public fast charging protocols on the market to meet the needs of different brands of cell phones for fast charging, before placing an order, please confirm that their cell phones are compatible with the public protocols, to avoid not being able to trigger the fast charging!
2. On the charging of the motherboard heat problem, charging treasure in the work, the current through the motherboard and the chip, energy conversion will have loss, this part of the loss in the form of heat emitted, fast charging, the power is large, the heat is more obvious, this is a normal physical phenomenon.
3. Just connected to the battery digital display power will be inaccurate, the power meter supports battery capacity self-learning function, charge and discharge cycle a few times after the normal.

Package include:
Module x1 + enclosure x1 + accessories x1

Peso 0,110 lbs
Dimensioni 14,00 × 7,00 × 3,00 in
Marca

DIY NOW

Origine

CN (Origine)

Prodotti chimici ad alto impatto

Nessuno

Condizione

Nuovo

Tipo

Modulo

è_personalizzato

Sì

Quantità

1

Applicazione

TELEFONO CELLULARE

Pacchetto

procedura operativa standard

Tensione

3.7 V

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “Modulo di ricarica rapida da 22,5 W”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Carrello
Torna in alto